Usage
| Code Block | ||
|---|---|---|
| ||
create volume [label=]<volname> disk=<device> [size=<size>[kKmMgGtT]]
create volume [label=]<volname> vg=<vg-name>|snapshotof=<volname>
disk=<device>size=<size>[kKmMgGtT] [options=<lvopts>]
create volume [label=]<thinpoolname> thinpool=1 vg=<vg-name> size=<size>[kKmMgGtT]create volume [label=]<volname> thinpool=<thinpoolname> size=<size>[kKmMgGtT]create volume [label=]<volname> filesys=xfs|ext4|zfs pathname=<fs-path> [disk=<disk-name>] [zp=<pool-name>]
delete volume [label=]<volname>
set volume <volname> [size|capacity=<size>[kKmMgGtT]]
[readAheadEnabled=boolean] [readAheadMulti=integer-val]
[readCacheEnabled=boolean] [writeCacheEnabled=boolean]
[cacheFlushDelay=integer] [varyioEnabled=boolean]
[readOnly|writeProtect=boolean]
show volume [[label=][user-label]]
|
Examples
| Code Block | ||||
|---|---|---|---|---|
| ||||
mayacli create volume testvol disk=/dev/sda
mayacli create volume testvol vg=vgtest size=200G
mayacli create volume snap_test snapshotof=testvol size=20G
mayacli create volume vmpool_thin thinpool=1 vg=vgtest size=200G
mayacli create volume vmdisk_thin thinpool=vmpool size=1T
mayacli create volume export1 filesys=xfs pathname=/vault/projects options='"*(rw,sync)""
|
Output
| Code Block | ||||
|---|---|---|---|---|
| ||||
mayacli show vol
Configured Volumes:
Type: id = Individual Disk, bd = Block Device, flex = Flexible Volume,
snap = Snapshot Volume, rg = Raid Group, vg = Volume Group,
tape = Virtual Tape Volume, vtape = Virtual Tape Drive,
vtl = Virtual Tape Library, crypt = Block level encrypted volume
Volume Type Size Device
-------------------------------- ------ --------- ----------------------------
rhel vg 9.00G /dev/rhel
testvg1 vg 223.57G /dev/testvg1
test_thinpool thinp 100.00G /dev/testvg1/test_thinpool
thinvol1 flex 15.00G /dev/testvg1/thinvol1
thinvol2 flex 20.00G /dev/testvg1/thinvol2
thickvol1 flex 50.00G /dev/testvg1/thickvol1
thinvol3 flex 20.00G /dev/testvg1/thinvol3
testzpool1 zpool 222.00G /dev/testzpool1
zvol1 flex 10.00G /dev/testzpool1/zvol1
zvol2 flex 100.00G /dev/testzpool1/zvol2
nvmevol1 block 953.87G /dev/nvme0n1
|